Step 1.
![](https://fursurebrush.com/wp-content/uploads/2020/04/Step1_ChooseInsertB.jpg)
Choose brush or curry pin insert
The Fur Sure® Vacuum Grooming brush kit comes with a curry pin brush and a bristle brush that can be easily changed depending on need.
Step 2.
![](https://fursurebrush.com/wp-content/uploads/2020/04/Step2_SwapInsertB.jpg)
Install desired insert into handpiece.
Install from the rear and push forward, lining up the rear tabs until fully seated.
Step 3.
![](https://fursurebrush.com/wp-content/uploads/2020/04/Step5_ConnectAdaptorAndBrushB.jpg)
Attach To Vacuum
For vacuum hose ends 1¼ inches through 2 inches, press vacuum hose end into flexible adaptor securely. Connection becomes stronger when vacuum is turned on.
Step 4.
![](https://fursurebrush.com/wp-content/uploads/2020/04/Step4_RubberGasketB.jpg)
If Hose is 2¼ in.: Remove the Rubber Gasket
The Fur Sure® brush will function if your vacuum hose end is 2¼ in. Remove the rubber gasket as shown before inserting vacuum hose.
Step 5.
![](https://fursurebrush.com/wp-content/uploads/2020/04/Step5_ConnectAdaptorAndBrushB.jpg)
Connect Adaptor and Brush
Insert the rotating tip into the back of the brush handpiece as far as it will go.
Step 6.
![](https://fursurebrush.com/wp-content/uploads/2020/04/Step6_StapHandpieceB.jpg)
Strap Handpiece to Hand
Grasp handpiece through strap. Tighten strap around back of hand. The handpiece can be used without this strap if preferred.
Step 7.
![](https://fursurebrush.com/wp-content/uploads/2020/04/Step7_BrushDogB.jpg)
Brush Pets or Surface
Turn on vacuum cleaner and, using a normal brushing motion, brush pets, animals to brush, groom, detangle and massage. Brush surfaces to capture and remove hair and fur.
![](https://fursurebrush.com/wp-content/uploads/2020/04/Step1_ChooseInsertW-1.jpg)